NOTE: It will take some time (about 1 minute) until connection is confirmed. Open the Wi-Fi panel and connect to the printer. This can be confirmed on the send page, Network Configuration, in the printer’s Self-test.Ĭonnecting/Setting TSP100IIIW on Windows.Ĭonfirm the printer has a ready LED light of solid blue. The Mac Address can be found under “Current IP parameter Status” at the bottom of the sheetįor the initial setup, the printer provides a temporary IP address, which is either: 192.168.10.1 or 169.254.1.1. The printer’s SSID, is “TSP100III-XXXXXX”, where “XXXXX” are the last 6 digits of the printer’s Mac Address located on the printer’s self test. The printer’s MAC and IP Addresses are obtained printing a Self-Test by pressing the button while powering the power, only releasing when printing beguins. Important: Please take note of your wireless network SSID and password, as well as your printer’s MAC and IP Addresses. Supported Environments: iOS, Android, Windows 10 (32bit/64bit), Windows 8.1 (32bit/64bit), Windows 8.0 (32bit/64bit), Window 7 (32bit/64bit) Check your printer documentation to find out how your model works.This application note shows how to manually setup the TSP100IIIW on a network and assign an IP Address with Windows, iOS and Android. On my older Brother printer, there is a separate reset button for the network interface. If the printer doesn't connect via Ethernet, you may need to reset it's network card settings. You'll want to remove the Ethernet cable when this happens. Note that once the printer joins a WiFi network, the wired Ethernet port will disconnect. You should be able to find a configuration page where you can scan for and join WiFi networks. Then, visit that IP address through a web browser. Then, determine what IP address is has been assigned by the router, either by having it print a status page or checking the router's web status page.

Again, you'll need to connect it to wired Ethernet.

If you don't want to use the Brother software, the printer should have a configuration web page. You do need to connect the printer by USB or wired Ethernet first, but once configured they work like a champ. I've found the Brother installer software works quite well at getting their printers connected to WiFi.

What is the mac address of a printer